Why Are the Wheels on My Longboard off Balance?

Disclaimer: TheRiderBuddy may earn a small commission from affiliate links in this article at no extra cost to you.

Last Updated on November 12, 2022

The wheels on a longboard can become off balance for a variety of reasons. The most common reason is that the bearings are not seated properly on the wheels. Another reason can be that the wheels are not the same size. Finally, the wheels can become unbalanced if they are not inflated to the proper pressure. 

So, if you’re facing this problem, you are in the right place. Let’s see why this problem happens and how to fix an unbalanced longboard wheel in easy steps. 

Reasons for Longboard Wheels Becoming Off Balance?

Longboarding is a mode of transportation that is gaining in popularity. Many people use them as a fun and easy way to get around. However, one of the potential drawbacks of longboarding is that the wheels can become off balance. This can happen for a variety of reasons, including: 

1. The Weight of the Rider

If the rider is heavier, it can put more pressure on one side of the longboard, causing the wheels to become off balance. 

2. Uneven Terrain

 If the longboard is ridden on uneven terrain, it can cause the wheels to become off balance. 

3. Poorly Made Longboard

 If the longboard is poorly made, it can cause the wheels to become off balance. 

4. Worn Out Longboard

 If the longboard is worn out, it can cause the wheels to become off balance. 

5. Wheels Became Misshapen

If a longboard is used for a long period, the wheels can become misshapen from the wear and tear, causing them to become off balance. 

6. Bad Bearings

If the bearings on a longboard are not of good quality, it can cause the wheels to become off balance. 

These are potential reasons why longboard wheels can become off balance. If you are having issues with your longboard wheels, it is important to take a look at these causes to see if you can fix the problem. 

How to Fix Longboard Wheels Off Balance Problem?

If you have ever ridden a longboard, you know how important it is to have the wheels in balance. If the wheels are not balanced, the longboard will not ride smoothly and can be dangerous. Here is a step-by-step guide on how to fix longboard wheels that are off balance. 

Things You Will Need

  • A Caliper
  • Wrench
  • New Set Of Bearing (If need to replace )
  • New wheels (If need to replace )  

First of all, you need to figure out the exact problem;

  • Is one wheel significantly different in diameter than the others?
  • Are the bearings appropriately seatedon the wheels?
  • Is the axle tight in the hanger?   

If One Wheel Is Significantly Different In Diameter

1. Remove the wheel and measure it with a caliper.

2. Find a washer or spacer with the same thickness as the difference in measurement.

3. Place the washer or spacer on the axle side of the wheel that is further out.

4. Replace the wheel and check to see if the problem is solved.   

If The Bearings Are Not Seated Properly in the Wheels

1. Remove the wheels and check if the bearing is seated correctly in the wheel.

2. If the bearing is not seated properly, gently tap it into place with a hammer.

3. Replace the wheel and make a test drive to see if the problem is solved.   

If the Axle Is Not Tight in the Hanger

1. Remove the wheels and check if the axle is tight in the hanger.

2. If the axle is loose, tighten it with a wrench.

3. Replace the wheel and check to see if the problem is solved. 

How to Avoid Longboard Wheels Off Balance Problem In Future?

If you are a longboarder, you know that one of the most annoying problems you can have is your wheels becoming off balance. Here are a few things you can do to avoid this problem in the future.

1. Avoid Rough Terrain

Riding your longboard on rough terrain is one of the quickest ways to damage your wheels and cause them to become unbalanced. If you must ride on rough terrain, try to avoid obstacles that could cause your wheels to become damaged or unstable. 

2. Inspect Your Wheels Regularly

Checking your wheels regularly for damage is a good way to prevent them from becoming unbalanced. If you see any damage, make sure to replace or repair the damaged parts as soon as possible. 

3. Balance Your Wheels

If your wheels become unbalanced, you can try to balance them yourself or take them to a local skate shop to have them professionally balanced. 

4. Buy High-Quality Wheels

One of the best ways to avoid unbalanced wheels is to invest in high-quality wheels designed to withstand heavy use.  

Final Words

If your longboard wheels are off balance, it’s likely because the board’s weight is unevenly distributed, the wheels are not the same size, or the bearings are not aligned correctly.

Follow our instructions to know how to fix and avoid future problems. We’d love to hear about your longboarding experience, so let us know in the comments below!


Taylor Jensen

Leave a Comment