Why Do Skateboarders Break Their Boards?

Disclaimer: TheRiderBuddy may earn a small commission from affiliate links in this article at no extra cost to you.

Last Updated on November 20, 2022

Skateboarders break their boards all the time. It’s just a part of the sport.

But do you ever wonder why they do it? What could possibly make someone want to break their expensive new board?

Skateboards can break in a variety of ways, but most of them happen during tricks. For example, a skateboard is designed to absorb shock, but it won’t absorb the impact if you hit a hard object like a rock.

Also, some break their boards because they’re inexperienced and don’t know how to ride them properly. In this article, I’ll take a closer look at the different factors that can contribute to a skateboard breaking.

What Makes a Skateboard Break?

There are a number of different factors that can contribute to a skateboard breaking. It’s important to be aware of these factors so that you can take steps to prevent your skateboard from breaking.

Cause of Impact

Skateboards are made of wood, and like any other wooden object, they are susceptible to breaking. The most common reason for a skateboard to break is impacting damage.

When a skateboard hits something hard, like a rock or curb, the force of the impact can cause the wood to break.

Lack of Caring

Impact damage is not the only way that skateboards can break, however. Improper care and storage of a board can also damage the wood and break.

They should always be stored in a cool, dry place and never be left in direct sunlight. Additionally, skateboards should never be stored in a humid environment, as this can cause the wood to warp and eventually break.

Hard Riding

The most common cause is riding it too hard. It is a challenging sport, and decks can only take so much abuse.

If you’re constantly doing big tricks and grinding on rough surfaces, your deck is going to take a beating and eventually break.

Tricks and Stunt

If you’re doing tricks and jumps that put a lot of stress on your board, it’s more likely to break. Likewise, the impact of landing tricks can put a lot of stress on the wood, causing it to crack or break. 

For example, regularly landing big air tricks or doing grinds, your skateboard is more likely to snap eventually. Try to stick to more straightforward tricks that don’t put as much stress on your board to avoid this problem.

Poor Quality Deck

Another common cause of broken decks is poor quality. There are a lot of cheap skateboards out there that are made with inferior materials.

These decks are more likely to break than ones that are made with high-quality materials. If you’re looking for a durable deck, it’s worth it to spend a little extra money on a good one.

Ride in Bad Weather

Extreme weather can also cause a deck to break. The deck can become brittle and break if it’s very cold or hot outside.

This is especially true if the deck is made of wood. If you live in an area with extreme weather, it’s important to be careful with your skateboard and avoid riding it in extreme conditions.

Riding in the rain or on wet surfaces can cause the wood to swell and warp. Additionally, riding on rough terrain or concrete can also lead to the boards breaking.

Old Board

Over the course of time, the wood will start to break down and splinter, making it unsafe to ride. In addition, due to wear and tear over time, the components of your skateboard will start to break down and deteriorate, which can eventually lead to the deck snapping in half.

This is especially common if you ride your skateboard regularly and don’t take proper care of it. For example, if your board is too old, it is unsafe to ride and perform tricks with it.

Bad Construction Quality

There are a lot of skateboards out there that are made with poor construction quality, and these boards can easily break. This is why finding a board with good construction quality is so important.

Otherwise, you may have to replace your board more often than you would like.

Misalignment after Maintenance

Skateboard can break if it’s not assembled correctly. If you’re not careful when putting together your board after regular maintenance.

It’s easy to accidentally put too much pressure on one of the joints, which can cause it to snap. This is why it’s always important to follow the instructions when assembling your skateboard.

Body Weight

The weight of your skateboard will cause it to break more readily if you’re a heavier rider. In addition, the extra weight puts more strain on the deck and components, making them more prone to breaking.

If you’re worried about your weight affecting the durability of your deck, look for one with a larger wheelbase or wider nose.

Why Do Skaters Break Their Boards on Purpose?

Some skaters choose to break their boards on purpose for a few different reasons. Maybe they’re trying to show off their skills, or perhaps they’re just trying to release some frustration.

Breaking the board can also be a way to show their commitment to skating. Sometimes skaters will bet each other to see who can break their board the most times in a row.

Public Attention

The first reason is the “Shock Factor.” Breaking a board is a very impressive trick that always gets a big reaction from the crowd.

It looks extremely difficult and dangerous, so when a skater successfully breaks their board, it really wows the onlookers.

Adrenaline Rush

Some skaters break their boards on purpose simply because they enjoy the destruction. There’s something about the sound of a board snapping in half that is just satisfying to some people, especially if you do it in one clean snap.

Skating is all about pushing your limits and trying new things, so when a skater breaks their board while attempting a challenging trick, it’s a huge accomplishment, making them break their board out of satisfaction.

Release Frustration

When a skater is having a bad day, they might take their frustration out by breaking their board. Skateboarding can be frustrating. You might land a trick perfectly ten times in a row, but on the eleventh try, you botch it and bail.

It’s enough to make even the most level-headed person want to snap their board in half out of frustration. And that’s exactly why some skaters purposely break their boards – to release all that built-up frustration in one Cathartic Act.

Get a New Board

Skaters may break their board because they’re unhappy with it. Maybe it’s the wrong size, shape, or color, and it’s not performing the way they want it to.

Or maybe they just want to try something new. Whatever the reason, breaking their board gives them an excuse to get a new one.

Show off Their Skills

Skateboarders know that breaking a board is impressive, and they want to impress their friends or anyone who’s watching. However, this can be a risky move because if they don’t break the board cleanly, they could end up hurting themselves.

But for some skaters, the risk is worth the reward to show off their skill. For example, when a skater breaks their board, it shows that they are able to do tricks that other skaters can’t do.

How to Prevent Your Board from Breaking?

As a skateboarder, you know that one of the worst things that can happen is for your deck to break. Not only does it mean you have to buy a new one, but it can also be dangerous if it happens while you’re riding.

However, with a little care and maintenance, you can keep your board in good condition for years to come. Here are some tips to help you prevent your skateboard from breaking.

Don’t Leave Your Skateboard in the Sun

The sun can damage the wood of your skateboard, causing it to break. Please don’t leave it in the sun or in a hot car, as this can cause the deck to warp.

If you’re not using your skateboard, store it in a cool, dark place.

Avoid Riding in Wet Conditions

Rain can cause your deck to break, so try to avoid riding in it. It’s actually one of the worst things you can do for your board.

Also, water can cause the wood to swell and crack, so it’s best to avoid riding in wet conditions if possible. 

Don’t Ride on Rough Surfaces

Riding on rough surfaces like concrete can also damage your skateboard. Try to stick to smooth surfaces like asphalt or wood if possible.

Be Careful When Carrying Your Skateboard

Carrying your skateboard by the trucks can damage the wood and cause it to break. Carry your skateboard by the edges instead.

Don’t Stand on Your Skateboard

Be careful not to stand on your skateboard while it’s not moving. This will put a lot of pressure on the deck and can cause it to break by damaging the wood.

If you need a break, get off your skateboard and walk.

Inspect Your Skateboard Regularly

Inspect your skateboard for any damage or wear and tear. Check for any deck, truck, or wheel cracks or damage.

If you see anything that looks like it could be a problem, fix it or replace the part before riding.

Don’t Jump off Your Skateboard

Jumping off your skateboard can damage it and cause it to break. If you need to get off your skateboard, walk it to the side of the road or sidewalk.

Don’t Lean on Your Skateboard

Leaning on your skateboard can damage the wood and cause it to break. If you need to lean on something, use a wall or a piece of furniture.

Don’t Use Your Skateboard as a Seat

Sitting on your skateboard can damage the wood and cause it to break. If you need a break, get off your skateboard and find a seat.

Use Adequately Sized Trucks

Make sure you’re always using the right size trucks for your deck. If your trucks are too big or too small, they can put undue stress on your deck and cause it to break.

Also, always tighten your trucks before you skate. Loose trucks can cause your deck to twist and break.

Don’t Do Too Many Tricks

Doing tricks is a great way to improve your skating, but it can also be hard on your board. If you’re landing tricks wrong or doing them too often, you can put a lot of stress on the deck and cause it to break.

How to Fix a Broken Skateboard?

Take a close look at your skateboard and identify any areas that need to be repaired. If there are any cracks in the deck, missing boards or hardware, or other major damage, you’ll need to replace those parts.

You can usually just sand them down and refinish the deck for smaller issues like scratches or dings. If your board has any cracks in the deck, you can patch them using plywood and wood glue.

But before taking any necessary steps, you’ll need to gather a few supplies –

  • Phillips head screwdriver
  • A hammer
  • Wood glue
  • Piece of Plywood
  • Sandpaper
  • Clamp
  • Fine Grit Sandpaper

Once you’ve gathered the necessary supplies, it’s time to get to work!

Step 1: Remove Broken Deck Pieces

Start by removing the broken pieces of your skateboard. If the deck is cracked, use the hammer to tap the cracks together gently.

Step 2: Remove the Screws

Use your screwdriver to remove any loose screws from the deck. Also, remove any screws that are holding the deck together. Be sure to save all of them in a safe place; you’ll need them later.

Step 3: Dissemble the Trucks

Once all of the loose screws have been removed, gently pry the deck off of the trucks.

Step 4: Check the Trucks

If the trucks are damaged, you’ll need to replace them. Otherwise, simply reattach the deck using the screws you saved earlier.

Step 5: Patch the Plywood

Cut a piece of plywood to fit over the crack. Apply a generous amount of wood glue to the plywood, then place it over the crack. Apply glued plywood to both sides of the break, and this will help prevent further damage. 

Step 6: Clamp the Board

Use clamps or weights to hold the plywood in place until the glue dries. Leave the board clamped overnight to allow the glue to set.

Step 7: Sand the Patched Area

Once the glue is dry, sand the area around the patch smoothly. You can paint over it if desired.

Step 8: Sand Using Fine-Grit Sandpaper

If you want to sand and refinish the deck, start by sanding down any rough spots. You can use coarse-grit sandpaper for this, followed by a finer grit to smooth things out.

Once the deck is smooth, wipe it down with a damp cloth to remove any dust.

Step 9: Reassemble and Test Ride

After following the steps above correctly, your skateboard deck should now be fully functional. Reattach the trucks and screw them into place. Then, test-ride your skateboard before hitting the streets.

What Is a Slam in Skateboarding?

Most skateboarders will “Slam” their board at some point while skating. It’s usually done when you’re trying a trick, and you end up falling on your back or your stomach.

Slamming your board can also happen if you land on something hard, like a rock or a curb. It can happen when attempting a trick, during a race, or just through general riding.

While it may seem negative, getting back up and continuing to ride is what makes skateboarding so great. It’s all about overcoming obstacles and learning from mistakes.

So, next time you take a spill, don’t get discouraged. Just get back on your board and keep skating!

Final Thoughts

Skateboarders break their boards on purpose to show off their skills. It is a way to prove that they are good at skating and can manage difficult tricks.

Boards break most often when the skater slams into the ground or when they do a flip and land on the board wrong. You can prevent your board from breaking by using better quality hardware and being more careful with your tricks.

Be careful when you ride your board; with little care, you can protect your deck from premature breaking.


Taylor Jensen

Leave a Comment