Why Do Skateboard Shoes Fit So Tight?

Disclaimer: TheRiderBuddy may earn a small commission from affiliate links in this article at no extra cost to you.

Last Updated on November 19, 2022

Skateboard shoes are designed to be tight-fitting to provide the wearer with good board control and stability. However, this can sometimes be a source of discomfort, particularly if you are new to skating or have never worn tight-fitting shoes before.

In this article, we’ll explore why skateboard shoes fit so tight and offer some tips on how to make them more comfortable to wear.

All Reasons Why Do Skateboard Shoes Fit So Tight?

There are a few reasons why skateboard shoes fit so tight.

Size

Most skate brands make their shoes a bit smaller than your average shoe size. This is because when you tie your shoes tight, they will loosen up about a half size. So, if you wear a size 10 in regular shoes, you might want to try a 9.5 in skate shoes.

Materials

Skateboarding requires a lot of movement and contact with the ground, so skateboard shoes are made with thinner, tougher materials than other types of shoes. This helps them last longer and hold up against all the wear and tear.

Shape

The shape of skateboard shoes is designed to give you better balance and control while skating. They tend to be low-cut with a slimmer profile, which helps you feel more connected to your board. And, they have a wider toe area to give you more space for tricks.

All of these factors combine to create a shoe that fits snugly and securely on your foot. That way, you can focus on skating without worrying about your shoes slipping off.

How Can You Make Your Skateboard Shoes More Comfortable?

If you’re a skateboarder, then you know how important it is to have comfortable skate shoes. After all, you’re going to be spending a lot of time on your feet, and if your shoes aren’t comfortable, it’s going to make skating a lot less enjoyable. Here are some tips on how you can make your skateboard shoes more comfortable:

Wear the Correct Size Shoe

This might seem like an obvious one, but it’s worth mentioning because it’s so important. If your shoes are too big or too small, they’re just not going to be comfortable. Make sure you try on a few different sizes before you decide on the right one for you.

Break in Your Shoes

Just like with any new pair of shoes, you’re going to want to break in your skateboard shoes before you start using them for skating. This will help to ensure that they’re more comfortable from the get-go. One way to break in your shoes is to wear them around the house for a few days before you take them out skating.

Invest in Good Quality Skate Shoes

Skateboarding is a tough sport, and your shoes will take a lot of abuse. That’s why it’s essential to invest in a good pair of skate shoes that are built to last. You might have to spend a bit more money upfront, but it will be worth it in the long run when your shoes last longer and stay more comfortable.

Customize Your Shoes

If you really want to make your skateboard shoes more comfortable, you can always customize them to fit your feet perfectly.

This might mean getting them professionally fitted, or it could just mean adding some extra padding in certain areas. Either way, this is a great way to ensure your shoes are as comfortable as possible.

Don’t Forget About Socks

Socks can actually make a big difference in the comfort of your skateboard shoes. If you choose the right pair of socks, they can help to absorb impact and protect your feet from blisters and other types of discomfort. Again, it’s worth investing in a good quality pair of socks that will last you a long time.

Following these tips should help you to make your skateboard shoes more comfortable so that you can enjoy skating to the fullest.

Just remember to take your time to find the right shoes for you, and don’t be afraid to customize them to ensure the perfect fit. With a little bit of effort, you can have the most comfortable skateboard shoes around!

What Are the Benefits of Wearing Tight-Fitting Skateboard Shoes?

There are many benefits to wearing tight-fitting skateboard shoes. They provide good support and grip, they look great, and they can help you avoid injury.

Good Support and Grip

Tight-fitting skateboard shoes offer good support and grip, which is essential for performing tricks and avoiding injuries. They help to keep your feet in place while you’re skating, and they provide the necessary traction to prevent you from slipping.

Look Great

Skateboard shoes come in a variety of styles, but tight-fitting shoes tend to look the best. They show off your feet and ankles, and they make it easier to see your board when you’re skating.

Avoid Injury

Wearing tight-fitting skateboard shoes can help you avoid injuries. Loose shoes can cause you to trip and fall, and they can also get caught on your board and cause you to lose control. Tight-fitting shoes will stay in place and provide the support you need to stay safe while skating.

Increased Comfort

Tight-fitting skateboard shoes are also more comfortable than loose shoes. They don’t rub or chafe against your feet, and they offer good support that helps to reduce foot fatigue.

Better Performance

Tight-fitting skateboard shoes can also improve your skating performance. They provide better support and grip, which can help you land tricks more easily. They also make it easier to control your board, which can help you skate better overall.

Durability

Tight-fitting skateboard shoes are also more durable than loose shoes. They’re less likely to fall off or get damaged, and they’ll last longer overall. This means you won’t have to replace them often, saving you money in the long run.

Easy to Find

Tight-fitting skateboard shoes are also easy to find. You can find them in most stores that sell skateboarding gear, and they’re available in various sizes so you can find the perfect fit for your feet.

Wide Variety

There is a wide variety of tight-fitting skateboard shoes to choose from. You can find them in a variety of colors, styles, and materials, so you’re sure to find the perfect pair for your skating needs.

How Do You Choose the Right Size of Skateboard Shoe?

When choosing a skateboard shoe, the most essential factor to consider is the size. The wrong size shoe can cause blisters, soreness, and even injury. Here are some tips on how to choose the right size skateboard shoe:

Measure Your Foot

Before you buy a skateboard shoe, you need to measure your foot. To do this, simply trace around your foot onto a piece of paper. Then, use a ruler or tape measure to measure the length and width of your foot tracing.

Know Your Shoe Size

Once you know the measurements of your feet, you can start looking at shoes. It’s important to know that not all shoes fit the same. In general, skateboard shoes run a little bit smaller than your average shoe. So, if you’re usually a size 8 in women’s shoes, you might want to try a size 9 in skateboard shoes.

Try Them on

Once you’ve found a few pairs of skateboard shoes that you think might work, it’s time to try them on. The best way to do this is at a skate shop, where you can try on different sizes and brands until you find the perfect fit.

Go for a Walk

Once you’ve found the right size skateboard shoe, take them for a test walk around the store. Make sure they’re comfortable and that they don’t rub or slide around on your feet.

Get the Right Width

In addition to getting the right size, you also need to make sure you get the right width. Skateboard shoes come in different widths, just like regular shoes. So, if you have wide feet, make sure to get a wide shoe.

Consider the Style

When choosing a skateboard shoe, you also need to think about the style. Do you want a low-top or high-top shoe? Do you want a classic sneaker look or something more modern? It’s important to choose a shoe that matches your skating style.

Pick the Right Color

The last thing you need to consider when choosing a skateboard shoe is the color. You want to pick a color that you like and that goes well with your other skate gear. But don’t get too caught up in the color. The most important thing is that you choose a shoe that’s comfortable and that fits well.

Follow these tips, and you’ll be sure to find the perfect skateboard shoe for you. Just remember to take your time, try on different shoes, and walk around in them before you make your final decision.

Best Shoes for Skateboarding

If you’re looking for the best shoes for skateboarding, look no further than our list of the five best options on the market. We’ve included a variety of different styles and brands to suit every skater’s needs.

Nike SB Stefan Janoski Max Shoes

These Shoes are one of the most popular choices for skateboarders, thanks to their comfortable design and stylish good looks.

They’re made with a breathable mesh upper and feature a Max Air unit in the heel for cushioning. The rubber outsole provides excellent grip and durability, making them ideal for skating.

Adidas Skateboarding Busenitz Shoe

A classic design that has been adapted for modern skating requirements is the Adidas Skateboarding Busenitz Shoe.

They’re made with a durable leather upper and feature a vulcanized rubber outsole for excellent grip and flexibility. The padded tongue and collar provide comfort and support, while the reinforced toe ensures lasting durability.

Vans Sk8-Hi Pro Shoes

An excellent high-top alternative that provides outstanding support and style are the Vans Sk8-Hi Pro Shoes.

They’re made with a suede and canvas upper and feature an UltraCush HD insole for cushioning. The rubber outsole provides excellent traction, and the shoes are equipped with Duracap reinforcement in high-wear areas.

Etnies Fader 2 Shoes

For skaters who require a shoe that can withstand all types of skating, the Etnies Fader 2 Shoes are a terrific option.

They’re made with a durable suede and canvas upper and feature STI Foam Lite Level 1 footbeds for cushioning. The rubber outsole provides excellent traction, and the shoes are equipped with an Impact-G heel crash pad.

Dc Lynx Vulc Shoes

If you’re looking for a shoe, you can skate in all day. The DC Lynx Vulc Shoes are a lightweight option. They’re made with a suede and textile upper and feature an EVA midsole for cushioning. The rubber outsole provides excellent traction, and the shoes are equipped with a Pill Pattern tread design.

Frequently Asked Questions

1. Do you need special socks for skateboarding?

No, you do not need special socks for skateboarding. However, it is important to wear socks that fit well and are comfortable. Avoid wearing socks that are too tight or too loose, as this can cause blisters.

2. What type of laces should you use for your skateboard shoes?

It comes to the type of laces you should use for your skateboard shoes. Ultimately, it is up to personal preference. Some skaters prefer to use thinner laces, while others prefer thicker laces. Experiment with different types of laces until you find a style that you like.

3. How often should you clean your skateboard shoes?

It is a good idea to clean your skateboard shoes on a regular basis, especially if you skate frequently. Simply remove the laces and brush away any dirt or debris that has accumulated on the shoe.

4. What are some common problems with ill-fitting skateboard shoes?

Some common problems that can occur with ill-fitting skateboard shoes include blisters, discomfort, and poor balance. Additionally, ill-fitting shoes can cause your feet to slip inside the shoe while skating, which can be dangerous.

5. What should you do if your skateboard shoes start to smell?

If your skateboard shoes start to develop an odor, it is best to clean them as soon as possible. Remove the laces and brush away any dirt or debris that has accumulated on the shoe. You can also spot clean the shoes as needed. If the odor persists, you may need to replace the shoes.

Final Say

So, now that you know all the reasons why skateboard shoes fit so tight, what can you do to make them more comfortable? Skateboarding is a high-impact sport, and your feet are going to sweat. Make sure you break in your new shoes before hitting the skate park by wearing them around the house for a few hours.

You may also want to consider investing in a good pair of insoles or orthotics that will provide extra cushioning and support.

Finally, always choose the right size skateboard shoe. A shoe that’s too small will be uncomfortable and cause blisters, while a shoe that’s too big will slip off your feet when you ride. We hope this article has helped you. Thanks for reading!


Taylor Jensen

Leave a Comment