Why Does My Skateboard Make So Much Noise?

Disclaimer: TheRiderBuddy may earn a small commission from affiliate links in this article at no extra cost to you.

Last Updated on November 24, 2022

As a skateboarder, you know that one of the most important things is to keep your board in good condition. This means making sure the wheels are tight, the bearings are clean and well-lubricated, and the surface you’re skating on is smooth.

If you’ve ever wondered why your skateboard is so noisy, you’re not alone. Skateboards can be quite loud, and there are a few reasons why this is the case.

The wheels are made of hard plastic or rubber, and they spin quickly on the pavement. This can create a lot of friction, and the result is a loud noise.

Another reason is because of the way they are built. Most skateboards have metal trucks, and these can create a lot of noise as they move along the pavement.

In this blog post, we’ll explore some of the reasons why your skateboard may be noisy and offer some tips on how to fix it.

All the Reasons for Noisy Skateboards

There are a few reasons why your skateboard may be making more noise than usual.

1. Wheels

Your average skateboard wheel is small, hard, and designed to grip the pavement- which makes them perfect for going fast but terrible for sound dampening. When you add in the fact that most skateboarders ride on rough concrete surfaces, it’s no wonder their boards are so loud!

2. Bearings

Skateboard bearings are designed to be as fast and frictionless as possible- which, again, is great for skating but not so great for noise reduction.

3. Trucks

The metal trucks that connect the wheels to the deck of the skateboard are another major source of noise. When you ride over a bump or crack in the pavement, the trucks will bounce and bang against the deck, making a loud noise.

4. Deck

The skateboard deck itself can also contribute to the noise level of your ride. If the deck is made of a hard material like plastic or metal, it will amplify the sound of the wheels and trucks bouncing against it.

5. Loose Bolts in skateboard

Another possible reason for a noisy skateboard is loose bolts. If the bolts that connect your trucks to your deck are loose, they can rattle around and cause a lot of noise.

Be sure to check all the bolts on your skateboard and tighten them if necessary.

6. Worn Out Bushings in Skateboard

If your skateboard is making a lot of noise, it could be due to worn-out bushings. The bushings are the small, round pieces of rubber that act as cushions between the trucks and the deck of your skateboard.

Over time, these bushings can become worn out and no longer provide proper cushioning, causing your skateboard to make a lot of noise.

7. Your Riding Style

Your riding style can also affect how loud your skateboard is. For example, if you tend to ride fast and aggressively, you’re likely to make more noise than someone who rides slowly and cautiously.

Additionally, if you do tricks that involve jumping or grinding on rails, your skateboard will be much louder than someone who just cruises around on the flat ground.

How to Fix Noisy Skateboards?

Noisy skateboards can be a nuisance to both the skater and those around them. Fortunately, there are a few easy ways to quiet down a skateboard.

With a little bit of effort, noisy skateboards can be a thing of the past. Here are some tips on how to fix noisy skateboards –

Cleaning Bearings

Step 1: If bearings are dirty, they will need to be cleaned with a solvent such as rubbing alcohol

Step 2: Remove bearings from wheels

Step 3: Place bearings in a bowl or container of rubbing alcohol

Step 4: Allow bearings to soak for up to 30 minutes

Step 5: Use a soft brush to remove any dirt or debris from the bearings

Step 6: Rinse bearings with water and dry completely before replacing them in the wheels

Replacing Bearings

Step 1: If bearings are damaged, they will need to be replaced

Step 2: Remove old bearings from wheels

Step 3: Insert new bearings into the wheels

Step 4: Make sure that the new bearings are seated correctly before skating

Replacing Wheels

Step 1: When wheels are worn down, they produce more friction and noise while skating.

Step 2: Remove old wheels from the skateboard

Step 3: Install new wheels on the skateboard

Step 4: Make sure that the new wheels are tight and secure before skating

Tightening Hardware

Step 1: Loose bolts or screws can cause rattling and noise

Step 2: Use a wrench or screwdriver to tighten all of the hardware on your skateboard

Step 3: Make sure that all bolts and screws are tight before skating

Consulting a Professional

Step 1: If your skateboard is still noisy after following these steps, it is time to consult a professional skateboard shop

Step 2: They will be able to diagnose the problem and help you find the best solution

Step 3: They may also be able to offer suggestions on how to prevent noise in the future

Frequently Asked Questions

1. How often should you change your skateboard bearings?

You should change your skateboard bearings every few months if you skate regularly. If you only skate occasionally, you can probably get away with changing them once a year.

To replace your bearings, simply remove the old ones from the wheels and insert new ones in their place.

2. What is the best way to clean your skateboard bearings?

The best way to clean skateboard bearings is to remove them from the wheels and soak them in a solvent such as denatured alcohol. After soaking for a few hours, scrub the bearings with a brush to remove any dirt or grime.

Rinse the bearings with clean water and dry them before reinstalling them in the wheels.

3. How can you stop your skateboard from wobbling?

If your skateboard is wobbling, it’s likely that the trucks are loose. Try tightening the screws on the trucks to see if that stops the wobbling.

Another possible cause of wobbling is that the wheels are not properly installed on the trucks. Make sure that the wheels are tight and properly seated on the axle before riding your skateboard.

4. Why are your skateboard deck cracking?

Skateboard decks can crack for a number of reasons. The most common reason is that the deck is made of cheaper materials that are not meant to withstand regular use.

If your deck is cracking, try replacing it with a deck made of higher-quality materials. Another possible cause of cracking is that the deck is not properly supported.

Make sure that the trucks are tight and that the wheels are properly installed before riding your skateboard.

5. How can you prevent your skateboard trucks from rusting?

Rusting is a common problem with skateboard trucks. The best way to prevent rust is to keep the trucks clean and dry.

If you live in a humid climate, you may want to apply a rust-resistant coating to the trucks.

Final Say

So there you have it. All the reasons for noisy skateboards and how to fix them. If your board is making too much noise, try some of these fixes; hopefully, it will be quiet again in no time.

And if all else fails, take it to a professional skateboard technician – they should be able to help you out without any drama. Have you ever had this problem before? What did you do to solve it? Let us know in the comments below!


Taylor Jensen

Leave a Comment