Why Can’t Skateboards Handle Rocks on the Road?

Disclaimer: TheRiderBuddy may earn a small commission from affiliate links in this article at no extra cost to you.

Last Updated on November 12, 2022

Have you ever been skating around and come across a big rock in the road? It can be frustrating when your board doesn’t seem to want to go over it. You might have wondered why this happens and why skateboards seem to have so much trouble with rocks.

Skateboards are designed to ride on flat surfaces and can’t handle gravel on the road. Skaters need to be aware of this and avoid riding their boards near roads with rocks. These can cause injuries and damage to skateboards.

In this blog post, I’ll explain why skateboards can’t handle rocks and how you can protect your board from them. So, keep reading if you’re curious about why skateboards struggle with rocky terrain.

The Problems with Skateboard Wheels on Rocks

Skateboard wheels are often made of hard plastic and designed for smooth surfaces, which can make them slide easily on smooth surfaces like pavement. However, when skateboarders try to ride on rougher terrain like rocks, their wheels can get caught on uneven surfaces and cause them to wipe out.

Skateboards work by using gravity and friction to move. For example, pushing down on the skateboard with your foot causes the board to lower down to the ground.

This, in turn, makes the wheels spin faster, and as they spin faster, they create more friction with the ground. Here are some problems that can cause by rocks-

  • Rocks on the road can damage skateboard wheels
  • Skateboards can’t handle the impact of hitting a stone
  • Rocks can cause skateboards to lose control
  • The deck can get damaged if it hits a rock on the road

To avoid these problems, skaters should consider using softer wheels made of materials like urethane. Additionally, riders should always avoid riding on rough surfaces and paths full of pebbles.

How Can Rock on the Road Cause a Problem for Skateboarders?

One problem skateboarders may face when riding on roads is the presence of rocks. Pebbles on the road can cause a problem for skateboarders because they can catch their wheels and cause them to trip.

Harder to Maintain Balance

It is extremely difficult to maintain balance and control while skating on a surface full of small rocks. If a stone is large enough, it can cause the skateboarder to trip and fall. They can also damage the skateboard itself, making it more challenging to ride.

Rock Can Damage the Wheels

One of the biggest problems with skateboard wheels on rocks is that they can damage the wheels. Skateboard wheels are made of a combination of soft rubber and plastic, which sharp edges can easily puncture.

Even small stones can cause significant problems, as they can get caught in the wheel and cause it to stop spinning. Sometimes, the rocks can be sharp and cause punctures in the wheels. This can be dangerous for skateboarders, especially if they are going fast.

This can not only lead to a loss of control, but it can also cause the rider to fall off the skateboard and sustain injuries.

Wheel Slides Off

Skateboard wheels are designed to roll smoothly over even surfaces. However, when they come into contact with rough or uneven surfaces, such as rocks, they can cause the skateboard to veer off course or even come to a complete stop.

Wheels can also chip and break off on impact with harder things. This can be extremely dangerous for the rider, and it is important to be aware of the potential hazards before attempting to ride on rocky terrain.

Bumpy Ride

Rocks will make the ride much bumpier and more uncomfortable. In addition, it creates a lot of vibration, making it difficult to stay balanced on the board. This can be especially problematic for beginners, who may not be used to riding over rough terrain.

What Are Skateboards Made of and How Do They Work?

Skateboarding is a fun and popular activity for people of all ages. It takes practice and skill to master, but once you get the hang of it, it can be a great way to get around.

History of Skateboard

A skateboard is a small, rectangular platform with four wheels that a person stands on while riding. The first skateboards were made in the early 1940s, but the activity did not gain popularity until the 1950s. Skateboarding was first developed in California, USA. It was originally called “sidewalk surfing.”

What Are They Made of?

Skateboards were originally hand-made from wood and roller skate wheels. Today, skateboards are mass-produced from materials such as wood, plastic, and aluminum. For example, the deck is usually made from seven or eight pliers of wood, and the trucks are made from aluminum. 

The deck is the skateboard platform, and the trucks are the metal axles connecting the wheels to the deck. The wheels are made of polyurethane, and the bearings allow the wheels to rotate freely on the axles. Polyurethane is a type of plastic.

This material is very strong and durable, which is why it is often used in the construction of skateboard wheels. The hardness of the polyurethane is what gives skateboards their distinctive bouncing motion.

Most skateboards have two sets of trucks, one at the front and one at the back. The front truck is called the nose, and the back truck is called the tail. The nose is usually wider than the tail to provide more stability when riding.

How Does a Skateboard Work?

The rider propels the skateboard by pushing their feet against the ground. The rider places their feet on the deck and then pushes off with their feet to start moving, and that’s how you ride a skateboard.

Riders can steer the board by leaning in the direction they want to go. The board will stop when the rider leans back on their heels. 

How to Improve Your Chances of Avoiding Obstacles while Skating?

Avoiding obstacles while skating can be difficult, but there are a few things you can do to improve your chances. Here are some tips to help you avoid obstacles while skating –

Use Soft Wheels

To avoid these problems, you should consider using softer wheels made of materials like urethane. These wheels will provide better traction on rough surfaces and be less likely to chip and break when riding over obstacles.

Additionally, riders should always inspect their wheels before heading out to skate and replace any damaged or worn-out wheels to ensure safety.

Skate in Rock Free Road

Keep away from riding in areas where there are large amounts of loose rocks. Instead, try to skate in areas that are clear of obstacles. If you see an obstacle in your path, slow down and be prepared to stop or go around it. 

Be Vigilant

Pay attention to your surroundings and be aware of potential obstacles in your path. Don’t take unnecessary risks while skating. If an obstacle seems too difficult to avoid, it’s better to be safe than sorry.

Stay Focused and Be Prepared to Stop

When you’re skating, it’s essential to keep your eyes on the path ahead so you can see any obstacles in your way. If you see anything, be prepared to stop or turn around.

Plus careful when skating near people or animals, as they may suddenly move into your path. When skating on unfamiliar terrain, you may need to be aware of everything that can come your way.

Wear Protective Gears

Always wear appropriate safety gear when skating, including a helmet, pads, and elbow and knee guards. This will help protect you if you do happen to hit an obstacle. 

Alternatives to Using a Skateboard to Get Around Town

With the rising popularity of skateboarding, more and more people are looking for alternative ways to get around town. While a skateboard can be an excellent option for some, it may not be the best choice for everyone.

Here are some alternative options to using a skateboard to get around town. Each of these methods has its own pros and cons that should be considered before choosing the best option for getting around town.

Walking

This is probably the most obvious alternative to using a skateboard. However, walking is a great option if you’re only going a short distance. It is often the simplest and most cost-effective way to get around, but it can be slow and tiring if the distances are far.

Biking

Biking is a great option if you’re looking for a faster way to get around than walking. It’s also a good option if you need to carry things with you, as you can put them in a backpack or in a basket on the front of your bike.

Rollerblading

If you’re looking for a way to get around that’s similar to skateboarding but maybe not quite as extreme, you can always try skates. Rollerblades and roller skates are excellent options for getting around town.

Public Transportation

There’s a good chance you have access to public transportation. This can be a great alternative to using a skateboard, as it’s usually faster and can get you further than you could skate on your own.

It is generally reliable and efficient, but it can be expensive and crowded during peak times. Ultimately, the best way to get around town will vary depending on the individual’s needs and preferences.

Car Ride

Driving a car is the fastest way to get around town. However, it is also the most expensive option due to the cost of gasoline and vehicle maintenance. Parking can also be a challenge in some areas.

Final Verdict

Skateboarders have been dealing with an age-old problem of how to avoid getting stuck on rocks while skating. Unfortunately, this issue seems to be only growing as skateboards become more popular modes of transportation.

As a skateboarder, it’s essential to be aware of the dangers that come with skating on rocks you may encounter on the road and know what solutions are available to you when faced with this hurdle.

There are ways to improve your chances of avoiding obstacles while skating. You can use different types of skateboards or find alternative methods of getting around town.


Taylor Jensen

Leave a Comment