What Size Nut for Skateboard Wheels?

Disclaimer: TheRiderBuddy may earn a small commission from affiliate links in this article at no extra cost to you.

Last Updated on November 8, 2022

There are a few things to consider when choosing the right size nut for your skateboard wheels. The diameter of the wheel, the width of the axle, and the type of skating you’ll be doing are all important factors.

The standard Skateboard wheel nut size is 5/16″. For most street and park skating, the standard-size nut will work just fine. But if you’re planning on doing some serious tricks, you might need a larger nut to keep the wheels from popping off.

In this blog post, we’ll explore why wheel nut size matters for skateboarding, and we’ll also help you figure out what size nut is suitable for your skateboard wheels.

Why Does Wheel Nut Size Matter for Skateboarding?

A lot of people might not know this, but the size of your wheel nuts can have a big impact on your skating experience. Here’s why:

The Wrong Size Wheel Nuts Can Cause Your Wheels to Fall Off

If your wheel nuts are too small, they might not be able to grip the axle tight enough. This can cause your wheels to come loose and eventually fall off while you’re skating.

The Wrong Size Wheel Nuts Can Make Your Skateboard Hard to Turn

If your wheel nuts are too big, they can make your skateboard hard to turn. This is because the extra weight of the larger nuts can throw off the balance of your skateboard.

The Right Size Wheel Nuts Will Keep Your Skateboard Running Smoothly

The right size wheel nuts, they will keep your skateboard running smoothly. This is because they will be able to grip the axle tight enough to keep the wheels from coming loose but not so tight that they make the skateboard hard to turn.

So, if you’re having trouble with your skateboard, make sure to check your wheel nuts to see if they’re the right size.

How to Measure Skateboard Wheel Nuts to Get the Right Size?

When you’re shopping for skateboard wheels, you’ll notice that there are a lot of different sizes available. So, how do you know which size is right for you? It’s actually pretty simple: all you need to do is measure the skateboard wheel nuts to get the right size.

Here’s a step-by-step guide to doing just that:

Step 1: Measure the Diameter of the Wheel Nut

Measure the diameter of the skateboard wheel nut. This is the distance from one side of the nut to the other, through the center.

Step 2: Measure the Width of the Wheel Nut

Measure the width of the skateboard wheel nut. This is the distance from one flat side of the nut to the other.

Step 3: Calculate the Circumference

Calculate the circumference of the skateboard wheel nut. This is the distance around the outside edge of the nut. To do this, simply multiply the diameter by 3.14 (or pi).

Step 4: Calculate the Area Wheel Nut

Calculate the area of the skateboard wheel nut. This is the amount of space inside the nut. To do this, multiply the circumference by the width.

Now that you know how to measure skateboard wheel nuts to get the right size, you can be sure that you’re buying the correct wheels for your skateboard. Just remember to take into account the type of skating you’ll be doing, as well as the size of your deck, when making your final selection.

How to Choose the Right Size Nut for Your Skateboard Wheels?

Skateboarding is a great way to get around, have fun, and stay fit. But like any sport, it takes the right equipment to perform at your best. That’s why choosing the right size nut for your skateboard wheels is essential.

The right size nut will depend on the type of skateboard you have, the width of your wheels, and the size of your bearings. Here’s a quick guide to help you choose the correct size nut for your skateboard.

Skateboard Type

The first thing to consider when choosing the right size nut for your skateboard is the type of skateboard you have. There are two main types of skateboards: street skateboards and longboards.

Street Skateboard

Street skateboards are the most common type of skateboard. They’re typically smaller and lighter than longboards, and they’re designed for tricks and maneuvering in tight spaces. The wheels on a street skateboard are usually between 50 and 60mm wide.

Longboard

Longboards are designed for cruising and speed. They’re longer and wider than street skateboards, and they have larger wheels to provide a smoother ride. The wheels on a longboard are usually between 70 and 90mm wide.

Wheel Width

The next thing to consider when choosing the right size nut for your skateboard is the width of your wheels. The width of your wheels will determine the size of the nut you need.

For example, if you have street skateboard wheels that are 50mm wide, you’ll need a 3/8″ nut. If you have street skateboard wheels that are 60mm wide, you’ll need a 1/2″ nut.

And if you have longboard wheels that are 70mm wide, you’ll need a 9/16″ nut. If you have longboard wheels that are 80mm wide, you’ll need a 5/8″ nut.

Bearing Size

The last thing to consider when choosing the right size nut for your skateboard is the size of your bearings. The size of your bearings will also determine the size of the nut you need.

For example, if you have street skateboard bearings that are 7mm wide, you’ll need a 3/8″ nut. If you have street skateboard bearings that are 8mm wide, you’ll need a 1/2″ nut.

And if you have longboard bearings that are 9mm wide, you’ll need a 9/16″ nut. If you have longboard bearings that are 10mm wide, you’ll need a 5/8″ nut.

Now that you know how to choose the right size nut for your skateboard, you’re ready to hit the streets and show off your skills. Just remember to always wear a helmet and protective gear and skateboard within your ability level.

Top 3 Skateboard Wheel Nuts

There are a lot of different skateboard wheel nuts out there, but which ones are the best? Here are the top three picks:

1. Titanium Skateboard Wheel Nuts

If you’re looking for the lightest and strongest skateboard wheel nuts available, then you want titanium. These wheel nuts are made from premium grade 5 titanium, and they’re 50% lighter than steel nuts of the same size.

But don’t let the light weight fool you – these things are strong. They have a tensile strength of 170,000 psi, which is nearly twice that of grade 8 steel.

Titanium skateboard wheel nuts are also corrosion-resistant and non-magnetic so they won’t rust or interfere with your bearings. They’re also anodized to resist scratching. And because they’re non-conductive, they won’t cause electrical shorts if they come into contact with your bearings.

2. Axle Nuts Kingpin Nuts for Skateboard

Axle nuts are the kingpins of the skateboard wheel world. They keep your wheels attached to your skateboard’s axles, and they come in a variety of sizes to fit different skateboard trucks.

There are two main types of axle nuts: standard axle nuts and locknuts. Standard axle nuts are the most common type of axle nut, and they’re the kind that come included with most skateboard trucks. Locknuts are a specialized type of axle nut that’s designed to prevent your wheels from coming loose.

Most skateboarders prefer to use locknuts, as they offer a higher level of security than standard axle nuts. However, locknuts can be a bit more difficult to install and remove, so if you’re new to skateboarding, you may want to stick with standard axle nuts until you get the hang of it.

3. BAOBLAZE 8pcs Carbon Steel Axle Nuts for Skateboard

If you’re looking for a great deal on skateboard axle nuts, check out the BAOBLAZE 8pcs Carbon Steel Axle Nuts. These durable nuts are made of carbon steel and are designed to last. They’re also affordable, making them an excellent choice for budget-minded skaters.

Final Say

In conclusion, the size of the nut matters for skateboarding because it can affect the performance of the skateboard. The right size nut can help to improve the speed and stability of the skateboard. So there are a few things to keep in mind when choosing the right size nut for your skateboard wheels. Thanks for reading.


Taylor Jensen

Leave a Comment