Best Longboards For Beginners to Buy in 2021

Disclaimer: TheRiderBuddy may earn a small commission from affiliate links in this article at no extra cost to you.

Last Updated on July 29, 2021

When it’s about buying the best longboards for beginners, I encourage everyone to keep things simple.

You don’t have to spend a ton of money to buy a beginner-friendly board. All you have to do is spend a bare minimum to buy the most effective longboard for learners considering performance, and usability.

So, what makes a longboard perfect for beginners?

Here are some features/benefits I always foresee from this sort of board to clinch a perfect buy-

  • First off, the obvious: Easy and quick to learn.
  • Stable, flexible, and durable.
  • Easy to control and push.
  • Comfortable foot placement.
  • Suitable for all sorts of riders like tall or short, heavy or light.
  • Maneuverable.
  • Worthwhile.

Keeping all those in mind, in this write-up, I’ve shortlisted and reviewed some of the top-notch longboards for beginners mentioning their highs and lows.

10 Best Longboard For Beginners

1. Volador 42-inch Freeride Longboard for beginners

Pros

  • Sturdy base.
  • Easy to learn for beginners.
  • The deck size (42″) is quite suitable for a beginner longboarder. It makes it easy for foot placement.
  • I like the aesthetics of the board, and it’s available in multiple designs.
  • It tolerates rough handling and is suitable for everyday use.
  • This board glides along smoothly without needing to push it hard.
  • Adjustable baseplate angle (50 or 45 degrees) gives you the liberty to bring a blend of maneuverability and stability.
  • Sufficient wheel clearance upon turning.
  • The wheel is perfect for getting a mix of pace and grip on the road, considering its size, durometer, and contact patch.
  • Perfectly suitable for both tall and heavy riders.
  • Reasonably priced.

Cons

  • The bearings are not the best. You might want to change it right off the bat. However, if you are a complete beginner, you don’t have to, as it’s quite ok to support learning the basics.
  • You may have to tighten the truck before your first ride.

Volador 42″ longboard offers everything a starter longboard should offer, considering the deck, truck, and wheel construction and specification.

As the deck is made of 8-ply hard rock maple, no question about the durability.

Moreover, it’s a 9″ wide deck having a camber concave profile. Meaning, you will get enough space for foot placement and stability from that deck width and profile.

As you can adjust the baseplate angle (either 50 degrees or 45 degrees), I suggest keeping the back truck at 45 degrees and the front truck at 45 degrees. It will ensure both the required stability and maneuverability at the same time.

This longboard comes with 70mm wheels having a 78A durometer. That means you will get the perfect combination of pace and grip from the wheel. On top of that, the big contact patch helps to ensure the required grip on the road.

If you are planning to gift a beginner-friendly longboard to your kids or someone else, this Volador 42″ is one of the best bets, without any doubt.

I don’t think you should spend a lot of money to begin your longboard journey. As this board is quite easy on the wallet and does the job just right for beginners, you won’t regret trying it out.

2. Magneto Hana Pintail Longboard

Pros

  • Pintail shape gives more space for foot placement that helps beginners to learn longboarding quickly.
  • Wonderful aesthetics and multiple shapes are readily available.
  • Ideal for both tall and heavy riders.
  • You will get a good grip on the deck and a smooth-riding experience because of the responsive truck.
  • The combination of maple and bamboo makes the board both flexible and durable at the same time.
  • Perfectly sized wheel having the ideal durometer for a beginner.
  • Easy to push.
  • A five-in-one tool comes with the purchase to help in performing different adjustments effortlessly.
  • Excellent customer service.

Cons

  • Slightly overpriced. Nonetheless, it doesn’t break the bank.
  • The company needs to focus on improving the packaging.

Hana pintail longboard is one of the best longboards for beginners when it’s about going from point A to B. It’s not too eye-popping but does the job right without any doubt.

The deck construction is quite beginner-friendly, considering the length (42″), width(9″), material, and shape of the deck.

Although pintail longboards tend to offer less wheel clearance, this particular longboard has nice cuts underneath on both sides to provide ample wheel clearance. However, the amount of wheel clearance is surely less than my top pick Volador 42″ longboard. Fortunately, you can buy this cruiser model from Hana Longboard to get way more wheel clearance as it’s a cut-out shape board.

Anyone weighing about 220 lbs wouldn’t find any difficulties riding this longboard and the tall guys like 6’7″.

Pro Tip: I suggest beginners tighten the truck before the first ride with the tool that comes with the purchase.

3. MBS All-Terrain Longboard

Pros

  • Excellent in dealing with bumpy roads.
  • It’s quite suitable for heavy-weight riders like 300 lbs.
  • You will get a smooth turning and remarkably fast riding experience.
  • Well constructed, provides good grip and is easy to control.
  • It goes quiet.
  • Both the length and width of the deck helps for comfortable foot placement.
  • Sufficient wheel clearance due to the cut-out shape.
  • This board comes pre-assembled, hence ready to use straight away.
  • It’s quite reasonably priced considering the performance and durability.

Cons

  • A bit heavier than usual.
  • Not an ideal one for sharp turns. That shouldn’t be a concern for beginners, though.

If you plan to ride over small cracks, rollover gravels, hard dirt, etc., you can’t go wrong with this MBS All-terrain longboard.

The maple wood makes the deck strong and durable, resulting in an ideal one for heavy riders. Although the suggested weight limit is 220 lbs, in reality, anyone weighing around 300 lbs wouldn’t cause any damage to the board.

As it’s a drop-down deck, you will get enough stability in riding, and pushing it is as easy as pie. No matter how fast you go, it won’t wobble.

I must praise the larger wheels (100mm) for having sharp lips and a big contact patch. Along with the drop-down deck shape, these features ensure control and grip together.

Altogether, it’s an ideal choice for beginner riders as controlling the board is something any new riders foresee more than anything else.

One of the drawbacks of this board is that it’s not too good to take sharp turns. However, our top pick Volador 42″ freeride, is one of the best longboards regarding this feature.

4. Atom Drop Deck Longboard

Pros

  • Quite easy to learn for the new riders.
  • It rides fast and smoothly without making too much noise.
  • Stable and easy to control. Kudos to the drop deck design.
  • Its 50-degree base plate reverse kingpin makes it easy to maneuver.
  • The big contact patch of the wheel provides a good grip.
  • Capable of handling heavy riders.
  • Ideal for both beginner and experienced riders.
  • The price is a bargain.

Cons

  • Trucks, wheels, and bushing are under par.
  • The grip tape on the deck is not too grippy.
  • Not too lightweight.

Atom is a well-reputed brand in making high-quality longboards, and this drop deck board is no exception.

From deck to the wheel, it offers all the essential features a beginner would anticipate from their first buy.

It’s a 9-ply maple deck (41″), meaning it’s quite durable and offers the standard length a new rider would expect. In addition, you will have ample space for foot placement and sufficient support from the deck to push it effortlessly because of the drop deck construction.

I must say, the truck is not any game-changer. Nonetheless, it offers the basics to maneuver the board with ease.

This board comes with standard-sized (70mm) wheels with a decent contact patch and lip profile to get a good grip on the road.

If you are looking for a basic longboard to move from point A to point B at an affordable price, this Atom drop deck longboard is certainly the one you should give a shot. However, the Volador 42″ performs way better than this longboard costing at the comparatively lower price point.

5. White Wave Bamboo Longboard

Pros

  • Easy to learn in a quick time.
  • Lightweight, hence effortless to carry.
  • Available in multiple shapes.
  • This longboard deck is quite flexible, at the same time, durable.
  • It’s a sanded deck to provide extra grip.
  • You will get enough stability and control because of the drop-through design.
  • The trucks and wheels support turning the board with ease.
  • Relatively fast and smooth riding experience.
  • A perfect longboard for the tall riders.
  • Sufficient wheel clearance because of the combination of drop through and cut out design. You won’t face any wheel bite riding on this board.
  • I dig the aesthetic of the board.
  • Reasonable price.

Cons

  • The white wheels tend to get dirty quicker than other colors.
  • The bearings could have been better.

This White Wave bamboo cruiser board for beginners is another excellent choice to ride around anywhere in the town. It’s quite capable of rolling over the bumps efficiently.

Having the perfect grip support from the deck is quite essential to learn things quickly in longboarding. I must say, the sanded wide board offers a quite grippy deck with comfortable foot placement to push and control the ride effortlessly.

The flexibility of the deck helps in balancing the board when it hits bumps.

It features a standard wheel (70mm) size for the learners with a big contact patch and a sharp lip profile for better grip on the road.

The trucks and bushing are up to the mark in providing the desired responsiveness a new rider would anticipate.

Overall, the White Wave bamboo cruiser is a cost-effective longboard for beginners offering everything for a smooth and pleasant riding experience.  

More importantly, it will take no time for most of the riders to learn longboarding with this cruiser board.

6. Magneto 44″ Kicktail Longboard

Pros

  • Sturdy and easy to ride.
  • Quite a spacious longboard to accommodate both tall and heavy riders comfortably.
  • The kicktail helps to take a quick turn and do several tricks.
  • Suitable for rough roads.
  • Flexible and durable deck.
  • The sand grit coating on the deck ensures adequate grip.
  • Grippy wheels and fairly responsive trucks.
  • Easy to balance for the longboard learners.
  • Reasonably priced.

Cons

  • A tad slow compared to other options I’ve listed here.
  • Because of its height, pushing this longboard might seem difficult to beginners.

This longboard features a 44″ long and 9″ expansive deck, which is the perfect deck size for beginners. As the deck comprises a combination of maple and bamboo, you will get a nice blend of flexibility and durability from it.

Except for the bushing, the wheels and trucks are a bit stiffer than usual. It would be best if you loosened them up before riding to get a better riding experience. On the contrary, I found some new riders tightening the trucks further to get even more stiffness. So, it depends entirely on your preference.

You can expect a considerable amount of grips from the wheels as they are soft and have a big contact patch.

The deck is cut underneath to give some sort of wheel clearance. Nonetheless, don’t expect anything similar to my top pic Volador 42″ as it’s a cut-out deck to provide maximum wheel clearance.

Overall, the Magneto 42″ longboard is a handy-dandy option for novice riders. You should be able to learn quickly without breaking the bank.

7. Quest QT-NSC44C Super Cruiser Longboard

Pros

  • Easy to learn.
  • An excellent longboard for someone starting out in terms of speed. It’s neither too fast nor too slow.
  • You will get a smooth-riding, turning, carving experience.
  • Stable and easy to balance.
  • The length (44″) and width (9.5″) of the board let tall riders place their foot quite pleasantly.
  • Ideal for both tall and heavy riders. Kudos to its massive size and build quality.
  • The rough wheels help to roll over the bumps smoothly.
  • This longboard comes fully assembled.
  • Acceptable price.

Cons

  • The bearings are not up to the mark.
  • Heavier riders would find it difficult to get speed.
  • Not too sticky grip tape.
  • You might feel it is heavy to carry around.

One of the drawbacks some riders have complained about this cruising board is its speed. I also feel it could have been faster. With that said, too fast longboards sometimes make it harder for a beginner to learn things quickly. You can plan your turn and learn steadily with this Quest board.

Taking tight turns is a bit difficult with this board. Not to mention, if you loosen up the truck a bit, it will improve the turning ability for sure.

As it features rough wheels, it will help you to roll over the obstacles smoothly. However, rough wheels tend to give less grip on the road. The big contact patch would compensate a bit in this case by making the wheels some sort of grippy.

All in all, this Quest longboard is quite a handy option for beginners considering the price and all the nitty-gritty it offers to the learners. I like the aesthetics too.

8. Playshion Drop-through Longboard

Pros

  • Awesome graphics on both sides.
  • Well suited for all levels of riders, including beginners.
  • Lightweight, hence easy to carry around.
  • Well constructed maple deck gives durability. It’s quite flexible as well.
  • It gives you good control while turning due to the concave deck radial concave.
  • The truck lets you turn sharp.
  • Easy to push for any level of riders due to its low ground clearance.
  • Grippy wheels.
  • Ready to use right off the bat.
  • Inexpensive.

Cons

  • The length might turn out to be short for some new riders regarding comfy.

PlayStation 39″ longboard is one of the finest options for beginners to advanced longboarders featuring everything you would be anticipating to get a smooth and controlled riding experience.

The deck is well constructed, having eight-ply of maple, well concaved for better control, well cut out to give maximum wheel clearance, low ground clearance to provide easy pushing benefits, etc.

The truck is well constructed with a reverse kingpin and is quite responsive to support sharp turns. Remember, you can always tighten or loosen the trucks for your comfort.

The wheels are big, soft, having the standard size (70mm) and big contact patch to offer adequate grip on the road.

Although it’s a longboard and doesn’t offer a kicktail, its compact size lets you reposition it effortlessly.

In a nutshell, Playshion drop-through is a perfect board for someone starting longboarding in terms of performance, price, graphics, etc. Had it been a bit longer, I would have listed it on top of some of the previous options I reviewed here.

When it’s about finding a budget option without compromising the performance, Palyshion 39″ longboard is something you must try.

9. Retrospec Zed Pintail Longboard

Pros

  • Amazingly easy to learn in a quick time.
  • Readily available in different graphics.
  • Well constructed and well crafted with quality materials.
  • Sturdy and easy to balance for novice riders.
  • Its anti-bite technology genuinely helps to prevent wheel biting efficiently.
  • The deck is constructed with a combination of bamboo and maple to provide both flexibility and durability. 
  • Good foot placement benefit, and the grip tape works fine too to make the deck grippy.
  • Responsive trucks made of quality aluminum confirm smooth turns and a lively feeling.
  • Big wheels having a big contact patch and kind of beveled lip provide both slide and grip on the road. 
  • Suitable for both heavy and tall riders.
  • Not too heavy, not too light. No issue in carrying it around.
  • It’s super affordable for what it offers.

Cons

  • You might want to change the bearing for a smoother and faster riding experience. Nevertheless, a beginner doesn’t have to ride too fast. 
  • It tends to slow down a bit quicker than other options.

Retrospec Zed is one of the best starter longboards and gifts, considering its graphics, build quality, craftsmanship, performance, price, etc.

Unlike some other pintail longboards, this one is featured, keeping safety as the top-most priority. The anti-bite technology that prevents wheel biting is one of the greatest features anyone could anticipate for safety.

The wheels have a rough surface. Meaning they will roll over the bumps efficiently. I already mentioned they are somewhat grippy as well because of the big contact patch.

Moreover, the wheels have an 85A durometer rating, which is such a good number to handle heavy riders without any hiccups.

10. Minority Maple Longboard

Pros

  • Awesome graphics. 
  • Multiple versions varying in graphics are readily available to choose from.
  • Well cut-out to give sufficient wheel clearance.
  • Enough space and the drop-down deck shape ensure comfortable foot placing and control while riding.
  • Sturdy and durable deck construction.
  • Responsive trucks offer adjustable baseplate angles to confirm both maneuverability and stability. (More on this later). 
  • You will get high acceleration due to the smaller wheels.
  • The wheels slide pretty well.
  • For the price, it’s a steal.

Cons

  • The wheels are not too grippy because of the wheel size, narrow contact patch, and beveled lip. 
  • Putting better bearings would make it smoother.

One of the most applauded aspects of this longboard is its adjustable baseplate angle trucks. You can adjust the baseplate angle to either 50 or 45 degrees. 

50-degree will give you the desired turn, and 45 degrees will confirm great stability at high speed. That means you can adjust two of the trucks implementing two different angles to get both maneuverability and stability.

The deck is super wide (10”) to provide a comfortable foot placement. From tall to short, also the heavy riders won’t find any trouble riding this longboard with control and smoothness. 

All in all, the Minority maple longboard is quite an affordable option for beginners. Moreover, it features every meat and potato to ensure quick and enjoyable longboard learning.

Verdict

So, this is it!

I’m sure now, picking the best longboard for beginners is as easy as falling off a log for you.

Considering the budget and effectiveness, the Volador 42″ freeride longboard steals the show without any second thought. Nevertheless, if you don’t like its shape and are desperate to try a pintail shape, Magneto Hana pintail is something you should get your eye in.

Don’t forget to wear safety gear whenever you ride a longboard.

Best Beginners Longboard Buying Guide

As I said earlier, you should keep things simple while choosing a suitable longboard if you are a beginner. With that said, you must learn the basics of longboard components to make an educated purchase. Otherwise, you are probably going to pour your money down the drain.

Let’s dig a little deeper to discover the buying factors.

Longboard Deck

The deck is where you place your foot. It’s the bread of the longboard sandwich.  Here are the parameters you should be focusing on while selecting a longboard deck.

  • Material.
  • Length and width.
  • Shape.
  • Profile.
  • Concave.
  • Mounting style.
  • Flex.

Material

A longboard can be constructed with different materials like bamboo, maple, fiberglass, carbon, etc. However, a beginner-friendly longboard should be made of either only maple or a combination of maple and bamboo.

Why?

It’s because the combination of maple and bamboo gives a nice blend of flexibility and durability. At the same time, they are inexpensive. If the deck is made of only maple, no issue, that is good to go too.

Typically, you will see 7 or 8-ply construction used to make a longboard deck.

Length and Width

A novice should have ample space for foot placement; hence getting the suitable long and wide longboard deck is crucial here. 

The standard length of a learner-friendly longboard is 41″-42″, and the ideal width is 9″.

Shape

Generally, the deck shape is categorized into two types – directional and symmetrical. Both shapes are quite ok for a beginner. The directional is more novice-friendly than its symmetrical counterpart, though.

The directional shape has about four variations like – pintail, fishtail, blunt, and mini cruiser. Pintail and mini cruisers are the most favorite amongst the new riders.

Similarly, the symmetrical shape has about four variations like – twin, cutout, drop down, speed board, where cutout and drop down are the most suitable ones for the newbies.

Profile

The deck profile is the deck’s lengthwise curve. It’s divided into two types – camber and rocker.

Camber is when you see the deck is curved upwards, and rocker is when you see the deck is curved downward.

I don’t recommend going for a rocker deck. Camber gives better stability which is quite pivotal for a beginner.

Concave

Concave is the width-wise curve of the deck, and it impacts the ease of turn of a board. Some of the variations of deck concave are – flat, radial, tub, and w-concave.

A new rider shouldn’t focus on these characteristics too much. While flat and radial are the most suitable ones, I would go for radial any day.

Mounting Style

Longboard manufacturers tend to imply either of the following four mounting styles – top mount, drop through, drop deck, double drop.

As a beginner, you can choose any of the above mounting styles. However, if you want my vote, I would vote for drop-through, as it gives the desired stability, responsiveness, and versatility.

Flex

A longboard deck can have three levels of flexibility. Flexible, medium flexible, and stiff. I recommend using the flexible deck to beginners. It’s because flexible decks provide shock absorbance support, which is essential for the learners to ensure comfortable rides.

Longboard Truck

If you don’t know anything about longboard trucks, they play a major role in controlling the riding. Depending on the longboarding styles, the truck configuration varies.

Good for you!

As a learner, you don’t have to be too concerned about different truck settings. Instead, stick to the basics, and look for any regular configuration to travel from point A to B.

Nonetheless, it won’t hurt you to learn about the different components of a truck briefly.

Here are the truck components I’m going to discuss in short –

  • Kingpin.
  • Axle & hanger.
  • Bushing seat.
  • Bushing.
  • Baseplate.

Kingpin

Kingpin keeps the hanger and the baseplate together, and there are two types of kingpins – standard kingpin and reverse kingpin.

Standard kingpin is almost obsolete now. But, of course, it would help if you didn’t use a standard kingpin either.

In the case of a reverse kingpin, the pin faces outwards from the axle and hanger. Thus, unlike the standard kingpin, you can customize reverse kingpin aluminum trucks effortlessly.

When it’s about stability, responsiveness, turning support, control at high speed, reverse kingpin outperforms its standard counterpart without any doubt.

Axle & Hanger

The hanger is the t-shaped metal of the truck, and the axle is the long pin that goes through to the hanger.

Both these are used to determine the width of the truck. Some manufacturers use the length of the axle (calculated inches) as the truck width, and some use the width of the hanger (calculated in mm).

Ideally, you will want to keep the axle length pretty close to the deck width, better if it’s longer than the deck width. However, keeping the axle length shorter won’t cause any major trouble for the riders.

Bushing Seat

Bushing seats are the place where the bushings of the truck sit. So it’s kind of a pocket in the hanger.

Bushing seats determine whether the bushings will sit tightly or they will remain loose.

Tight bushing seats hold the bushings tight, resulting in more control at high speed but less turn.

On the contrary, open bushing seats hold the bushings loosely, resulting in less control at high speed but sharp turns with ease.

Fortunately, you can customize the bushing seat configuration without any hassle whatsoever.

Bushings

Bushings have different shapes like – cone, barrel, stepped cone, double-stepped.

The Cone shape gives the highest amount of turning support. Barrel shapes offer sharp turns, too but not like the cone ones.

Stepped cones give stability, and double-stepped are the best ones at high speeds, particularly for downhill longboarding.

For a beginner, downhill longboarding is not recommended. That’s why I suggest using either cone or barrel bushing with a tight bushing seat for beginner longboards.

Baseplate

Baseplate angle plays a vital role in controlling the carving ability of the board. The standard baseplate angle is 50-degree, and it’s the ideal angle for a learner to learn to take turns quickly.

Higher than 50-degree will make the truck more responsive and helps you to turn quicker. On the other hand, less than 50-degree will make the truck comparatively stiff.

Longboard Wheels

Wheels are another crucial component of a longboard. So let me list down the characteristics of wheels that decide your riding experience.

  • Wheel size.
  • Wheel shape.
  • Wheel contact patch.
  • Wheel durometer.
  • Wheel core.

Size

Wheel size varies from 55mm-100mm, and 70mm is the most popular one. Therefore, I recommend using 70mm wheels to new riders.

Bigger than 70mm wheels give top speed. However, they don’t offer enough acceleration.

Smaller than 70mm wheels feature high acceleration but low top speed.

Shape

Typically, wheels have three different shapes – sharp lip, beveled lip, rounded lip.

In most cases, you will find sharp lip wheels, and they are experts in offering grip on the street. Getting an excellent grip is something every beginner should expect from the wheels.

The rounded shape is helpful for sliding, and the beveled lip stays in between sharp and rounded lips in terms of ensuring grippy wheels.

Contact Patch

The contact patch is determined by the width of the wheels from lip to lip. A wheel either has a big contact patch or a narrow contact patch.

Beginners should use a big contact patch as they tend to offer more grip than a narrow contact patch.

Wheels that have a big contact patch usually have sharp lips as well.

Durometer

Durometer decides how hard or soft a wheel is. Its unit is “A,” and the durometer of wheels varies from 1A to 100A, where 1A is the softest and 100A is the hardest ones. Usually, you will see manufacturers use wheels having durometers ranging from 75A to 90A.

Softer wheels give a good grip, but they run slow.

On the contrary, harder wheels offer less grip, but they run fast.

Core

Wheel core is where the bearings sit. As the bearings can be placed in three different places, the core is divided into three types – centerset, sideset, offset.

Centerset makes the wheels grippy more than any other type as the bearings sit in the center of the wheel.

Sideset is good for sliding as the bearings sit at the side of the wheel.

Offset is when the bearings are placed in some area that’s neither side nor the center of the wheels.

As a beginner, you don’t have to worry about the wheel core too much. But, nevertheless, I vote centerset to get enough wheel grip. 


Rider Buddy

Leave a Comment