Can You Use WD-40 on Skateboard Bearings?

Disclaimer: TheRiderBuddy may earn a small commission from affiliate links in this article at no extra cost to you.

If you’re a skateboarder, you know that taking care of your board is important to keep it in good condition. One of the essential parts of a skateboard is the bearings, which help the wheels rotate smoothly. So, can you use WD-40 on skateboard bearings?

The short answer is no. WD-40 is a lubricant and penetrant, but it’s not designed for use on skateboard bearings. Skateboard bearings are best cleaned with a solvent like denatured alcohol and then lubricated with light oil. Using WD40 on skateboard bearings can cause more harm than good, so it’s best to avoid it.

In this article, we’ll look closer at skateboard bearings and why WD40 isn’t the best choice for them. We’ll also provide tips on cleaning and lubricating your bearings to keep them in good condition.

Why Is WD-40 Not Ideal Choice for Skateboard Bearings?

Wd40 is a common household lubricant used for many purposes, such as lubricating door hinges and garage door tracks. However, overall, Wd40 is not an ideal choice for skateboard bearings because:

WD-40 Is Water Base Lubrication

While WD-40 can provide a smooth ride for your skateboard, it is not ideal because it is water-based. This lubricant will eventually wash away with rain or water from riding through puddles. In comparison, bearing lubricants made specifically for skateboards are oil- or silicon-based and will last much longer.

WD-40 Can Attract Dust and Dirt

Another downside to using WD-40 is that it can attract dust and dirt. This can cause your bearings to become clogged and decrease their performance. In addition, it can be difficult to clean your bearings if they become filled with dirt and grime.

Overall, WD-40 is not the best choice for skateboard bearings. Many other bearing lubricants on the market are specifically designed for skateboards and provide a much smoother ride.

What Can You Use for Clean Skateboard Bearings?

You’re not alone if you’ve ever wondered what you can use for clean skateboard bearings. Unfortunately, many skateboarders are unsure of the best way to clean their bearings. So here are a few options for cleaning your bearings:

Alcohol

One way to clean your bearings is with alcohol. You can use isopropyl alcohol, which is also known as rubbing alcohol. This method is effective because alcohol dissolves oils and grime.

Acetone

Cleaning your bearings with acetone is another option. Acetone is a strong solvent that will dissolve oils and grime. However, it is important to note that acetone is also flammable, so be sure to use it in a well-ventilated area.

Mineral Spirits

Mineral spirits are another type of solvent that you can use to clean your bearings. This method is effective because it will dissolve oils and grime. However, mineral spirits are also flammable, so be sure to use them in a well-ventilated area.

You can use any of them for cleaning skateboard bearings. Be sure to use whatever you choose in a well-ventilated area to avoid accidents.

How Often Should You Clean Skateboard Bearings?

If you skate regularly, you should clean your skateboard bearings every few months. If you live in a dusty environment or skate in the rain, you may need to clean them more often. Also, if you frequently ride in dirty areas, you will need to clean your bearings more often.

How to Clean Skateboard Bearings?

If you want your skateboard to keep rolling smoothly, you need to keep your bearings clean. Here’s a step-by-step guide on how to do just that:

Things You Will Need

  • Bearing cleaning solution
  • Lint-free cloth
  • Toothbrush
  • Bearing greaser

Step 1. Remove Bearings

Remove the bearings from your skateboard wheels. You can do this by popping out the axle pegs with a skate tool or unscrewing the nuts.

Step 2. Soak Them in the Solution 

Place the bearings in a bearing cleaning solution and let them soak for a few minutes. This will help loosen any dirt or grime on the bearings.

Step 3. Use Toothbrush to Remove Stubborn Dirt

Use a lint-free cloth to wipe the bearings clean. You may need a toothbrush to get rid of any stubborn dirt.

Step 4. Use Lint-Free Cloth to Dry

Dry the bearings off with a lint-free cloth.

Step 5. Apply Grease

Apply a small amount of bearing grease to the bearings. This will help keep them running smoothly.

Step 6. Put Them Back in the Place

Place the bearings back in the skateboard wheels and screw on the axle nuts or pop in the axle pegs.

And that’s it! Following these simple steps can keep your skateboard bearings clean and running smoothly.

Final Words

In the end, we can say that WD40 might be good for other things, but it is not the best choice for skateboard bearings. WD40 can damage the bearings and make them less effective. It is best to just stick to using bearing oil or cleaner.

I hope this article helped clear some things up for you. Feel free to leave a comment if you have any questions.


Taylor Jensen

Leave a Comment